Morgan 4/4 4 seater Specifications

Technical Specification

Back to New Cars

Dimensions
Length : 4025mm/13'2"
Width : 1520mm/5"
Height : 1320mm/4'4" (approx)
Chassis Chassis Separate Z shaped section with 5 tubular or box section cross members
Colours Royal Ivory, Corsa Red, Indigo Blue, Black and Connaught Green. Any single or two-tone combination from the ICI Autocolour range is available as an option.
Weight
Kerb weight, kg (actual dependent on spec.) : 970
Ground clearance (average) (driver and passenger) : 13cm/5"
Max. total weight including passengers and luggage, kg : 1300
Fuel
Fuel Tank Volume litres/gallons : 45/10
Fuel Consumption :
  mpg 1/100km
Urban 24.80 11.39
Extra Urban 44.91 6.29
Combined 34.53 8.18
Wheels
Centre lock wire wheels : Standard painted 6" x 15" (195/60/15 tyres)
with rudge hubs : Optional chrome 6" x 15" (195/60/15 tyres)
Steering
Turning circle m/ft : 9.75/32
Turns lock to lock : 3 rack and pinion
Steering column : Collapsible safety top section with combined steering lock
Steering wheel : 35cm/14" or 38cm/15" (41cm/16" airbag with offset centre)
Transmission
Mph/1000 rpm (top gear) : 24.7
Mph at 2500 ft/min, piston speed (theoretical) : 107
Final drive ratio : 3.73:1
Overall gearing in top gear : 3.06:1
Indirect ratios:  
1st gear : 3.89:1
2nd gear : 2.06:1
3rd gear : 1.34:1
4th gear : 1.0:1
5th gear : 0.82:1
Reverse : 3.51:1
Clutch : Single plate 216mm
Rear axle : Tubular live axle with hypoid gears
Suspension
Front : Independent sliding pillar with coil springs and gas filled telescopic shock absorbers
Rear : Semi-elliptic leaf springs with gas telescopic shock absorbers
Toe in : 0-3 mm or 0-30
   
Engine
Configuration : In line 4 cylinder
Valve : D.O.H.C 16 valve with hydraulic tappets
Bore x stroke, cc : 80.6 x 88
Engine capacity, cc : 1796
Max output EEC, kw/hp/rpm : 81.5/114/5800
Max torque EEC, Nm/rpm : 160/4500
Max torque EEC,lb ft/rpm : 118/4500
Power to weight ratio hp/tonne : 117
Torque to weight ratio, lb ft/tonne : 122
Octane rating : min 95 Ron
Fuel System : Electronic fuel injection. Sealed evaporative control system through charcoal canister.
Exhaust system : Cast iron manifolds to stainless steel system with single catalyst with lambda sensor.
Compression ratio : 10.0:1
Brakes
Front : AP lockheed 4 pot callipers, 28cm/11" disc brakes
Rear : 23cm/9" drum
Operation : Hydraulic, dual circuit with vacuum servo assistance
Handbrake : Sports "Fly-off" type

Back to New Cars